BPJXL - 52100, THREADWELL CUTTING TOOLS CARBON STEE

  • MSDS: BPJXL
  • Manufacturer: BESLY PRODUCTS CORP
  • Product Name: 52100, THREADWELL CUTTING TOOLS CARBON STEE
  • National Stock Number: 9510-00N031598
Product Identification

Product ID:52100, THREADWELL CUTTING TOOLS CARBON STEE
MSDS Date:11/01/1985
FSC:9510
NIIN:00N031598
MSDS Number: BPJXL

Responsible Party
BESLY PRODUCTS CORPORATION
100 DEARBORN AVE
SOUTH BELOIT, IL 61080
US

Emergency Phone: 815-389-2231

Info Phone: 815-389-2231

Cage: 92061

Contractor
BESLY PRODUCTS CORPORATION
SOUTH BELOIT, IL 61080 US

Telephone: 815-389-2231

Cage: 92061

Ingredients

CHROMIUM

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 1.50%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


IRON (PEL/TLV AS IRON OXIDE FUME)

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: BALANCE

OSHA PEL 10(FE) MG/M3

ACGIH TLV: 5(FE) MG/M3


MANGANESE

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 0.35%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293


CARBON BLACK; (CARBON)

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 1.00%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3


SILICON

CAS: 7440-21-2

RTECS: VW0400000

Fraction By Weight: 0.25%

OSHA PEL 10MG/M3 TDUST;5RDUST

ACGIH TLV: 10 MG/M3 TDUST


SULFUR; (SULPHUR) (PEL/TLV AS SULFUR DIOXIDE)

CAS: 7704-34-9

RTECS: WS4250000

Fraction By Weight: 0.5%

OSHA PEL 2 PPM, 5 STEL

ACGIH TLV: 2 PPM, 5 STEL


PHOSPHORUS (WHITE); (PHOSPHORUS)

CAS: 7723-14-0

RTECS: TH3500000

Fraction By Weight: 0.4%

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.1 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


PROCESS CTL & PERSONAL PROT EQUIP APPROP TO

RTECS: 9999999ZZ


RSLTG EXPOS WHEN HNDLG, CUTTING (THERMAL/MECH) &/OR

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROD IN FORM SOLD DOES NOT CONSTITUTE
PHYS HAZ/HLTH HAZ. SUBSEQUENT OPERATIONS SUCH AS ABRAD, MELT, WELD,
CUTTING/ PROCESSING IN ANY OTHER FASHION MAY PRDCE POTENTIALLY HAZ
DUST/FUME WHICH CAN BE INHA LED, INGEST/COME IN CONT W/SKIN/EYES.
DETERM ACTUAL EXPOS BY INDUST HYGIENE MONITORING. ACUTE: METALLIC
(EFTS OF OVEREXP
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:EFTS OF OVEREXP:TASTE; NAUS, TIGHT OF CHEST;
FEVER; IRRIT OF EYES/NOSE/THROAT & SKIN; LOSS OF
CONSCIOUSNESS/DEATH DUE TO WELD GASES/LACK OF O2. CHRONIC:NO
ADVERSE EFTS FROM PROD IN THEIR SOLID FORM. A DVERSE EFTS MAY/MAY
NOT RESLT FROM LONG-TERM EXPOS TO DUST/FUME/ GASES, ETC. BY WAY OF
SUBSEQUENT OPERATIONS (SUPP DATA
Medical Cond Aggravated by Exposure:AGGRAVATION OF PRE-EXISTING
RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR, IF CONDITION CONTINUES, CONSULT
PHYS. EYE: FLUSH WELL WITH RUNNING WATER FOR AT LEAST 15 MIN TO
REMOVE PARTICULATE. GET MED ATTN. SKIN: BRUSH OFF EXCESS DUST. WASH
AREA WEL L WITH SOAP AND WATER. INGEST: SEEK MEDHELP IF LARGE QTYS
OF MATERIAL HAVE BEEN INGESTED.

Fire Fighting

Flash Point:NONE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:USE GOOD HOUSEKEEPING PRACTICES TO PVNT ACCUMULATION
OF DUSTS & TO KEEP AIRBORNE DUST CONC @ MINIMUM. MATL IS
POTENTIALLY CONTAMD W/COATING SUCH AS OILS FOR PRESERVATIVES &
OTHER CONTAM. IF MATL IS CO NTAMD, SPEC PREC SUCH AS (ING 8)

Exposure Controls

Respiratory Protection:IF FUMES, MISTING OR DUST CONDITION OCCURS & TLV
IS EXCEEDED, PROVIDE NIOSH/MSHA APPROVED RESPIRATORS.
Ventilation:GEN-RECOM (TO KEEP AIRBORNE CONC OF DUST/FUMES BELOW ACGIH
TLV'S). LOCAL-AS REQUIRED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EFTS OF OVEREXP: ON PROD. ING 4: NUISANCE DUST. ING 1: HIGH PULM TOX &
EXPERIMENTAL CAUSE OF NEOPLASM(S). ING 2: DUST CAN CAUSE CONJ,
CHOROIDITIS, RETINITIS, & SIDEROSIS OF TISSUES. OXIDE FUME CAN CAU
SE CHRONIC BRONCH. ING 3: HIGH TOX VIA INTRAPERITONEAL & INHAL
RTES; PRLNG EXPOS CAN CAUSE CNS DAMAGE.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:5000F,2760C
Melt/Freeze Pt:M.P/F.P Text:2500F,1371C
Spec Gravity:7.8-8.2(H2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:VAROIUS SHAPES, SOLID, ODORLESS METAL

Stability

Stability Indicator/Materials to Avoid:YES
REACTS WITH STRONG ACIDS TO GENERATE H2 GAS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:METALLIC OXIDES.

Disposal

Waste Disposal Methods:SOLIDS-SALE AS SCRAP FOR REUSE. DUST, ETC-FOLLOW
FEDERAL, STATE AND LOCAL REGULATIONS REGARDING DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.